Download Center for FPGAs
Select release:
Operating System Support for Intel FPGA Complete Design Suite
Information about OS Support for Intel FPGA Complete Design Suite is available on the Operating System Support page of the Intel FPGA website. Related Information, please refer to Operating System Support.
Information about OS Support for Intel FPGA Complete Design Suite is available on the Operating System Support page of the Intel FPGA website. Related Information, please refer to Operating System Support.
Minimum Disk Space for Intel FPGA Software Version 17.1
Software | Minimum Disk Space |
Quartus Prime Pro Edition | 35 GB |
Quartus Prime Standard Edition | 38 GB |
Quartus Prime Lite Edition | 14 GB |
Stand-Alone Programmer | 1.7 GB |
Intel FPGA SDK for OpenCL | 36 GB |
Intel SoC FPGA Embedded Development Suite | 6 GB |
Intel Advanced Link Analyzer | 3 GB |
Intel recommends that your system be configured to provide virtual memory equal to the recommended physical RAM that is required to process your design.
Recommended Physical RAM for Intel Devices 17.1
Family | Recommended Physical RAM | |
Arria | 10 | 18-48 GB |
V GZ | 8-16 GB | |
V | 6-16 GB | |
II GZ | 4-8 GB | |
II GX | 1.5-6 GB | |
Cyclone | 10 GX | 18 GB |
10 LP | 512 MB - 1.5 GB | |
V | 6-8 GB | |
IV GX | 512 MB - 2 GB | |
IV E | 512 MB - 1.5 GB | |
MAX | 10 | 512 MB - 2 GB |
V | 512 MB | |
II | 512 MB | |
Stratix | 10 | 80-128 GB |
V | 8-28 GB | |
IV | 2-12 GB |
The Quartus Prime software version 17.1 supports the following EDA tools.
The DSP Builder software version 17.1 supports the following EDA tools.
Synthesis Tools | Version | NativeLink Support |
|
Pro | Standard | ||
Mentor Graphics Precision | 2017.1 (1) | ![]() |
![]() |
Synopsys® Synplify, Synplify Pro, and Synplify Premier | 2017.09 (2) | ![]() |
![]() |
Notes:
- Mentor Graphics Precision versions that support the Intel Quartus Prime software are typically released after the release of the Intel Quartus Prime software. Contact Mentor Graphics for versions of Mentor Graphics Precision that support Intel Quartus Prime Standard Edition Software Release Version 17.1.
- Synopsys Synplify, Synplify Pro, and Synplify Premier versions that support the Intel Quartus Prime software are typically released after the release of the Intel Quartus Prime software. Contact Synopsys for versions of Synopsys Synplify, Synplify Pro, and Synplify Premier Precision that support Intel Quartus Prime Standard Edition Software Release Version 17.1.
Simulation Tools | Version | NativeLink Support |
||
Pro | Standard | Pro | Standard | |
Aldec Active-HDL | 10.3 (Windows only) |
10.3 (Windows only) |
![]() |
![]() |
Aldec Riviera-PRO | 2017.02 | 2015.10 | ![]() |
![]() |
Cadence INCISIV Enterprise Simulator (IES) | 15.20 (Linux only) |
14.20 (Linux only) |
![]() |
![]() |
Mentor Graphics ModelSim® PE | 10.5c | 10.4d | ![]() |
![]() |
Mentor Graphics ModelSim® SE | 10.5c | 10.4d | ![]() |
![]() |
Mentor Graphics ModelSim-Intel FPGA | 10.5c | 10.5b | ![]() |
![]() |
Mentor Graphics Questa® | 10.5c | 10.4d | ![]() |
![]() |
Synopsys VCS and VCS MX | 2016.06-SP2-1 (Linux only) |
2014.12-SP1 (Linux only) |
![]() |
![]() |
Formal Verification Tools (Equivalence Checking) |
Version | NativeLink Support |
Cadence Encouter Conformal | 8.1 | ![]() |
The DSP Builder software version 17.1 supports the following EDA tools.
Tools | Version | |
Pro | Standard | |
MATLAB |
R2015b R2015a R2014b R2014a R2013b |
R2013a |